NAME

osiop — Symbios/NCR 53C710 SCSI driver

SYNOPSIS

osiop* at gsc? irq 9 (hppa)

DESCRIPTION

The osiop driver provides support for the Symbios/NCR 53C710 SCSI controller chip.

The Symbios/NCR 53C700 SCSI controller is handled by the oosiop(4) driver, while the Symbios/NCR 53C8xx PCI SCSI host adapters are handled by the siop(4) driver.

CONFIGURATION

The osiop driver supports the following flags for use in config(8) files:

bits 0-7:

disable disconnect/reselect for the corresponding SCSI target

bits 8-15:

disable synchronous negotiation for SCSI target

bits 16:

disable DMA interrupts

"Target" is synonymous with SCSI ID number.

Note that SCSI tape drives should be allowed to perform disconnect/reselect or performance will suffer.

SEE ALSO

cd(4), ch(4), intro(4), oosiop(4), scsi(4), sd(4), siop(4), st(4), uk(4)

HISTORY

The osiop driver first appeared in NetBSD 1.6.

The original NCR 53C710 driver appeared in NetBSD 1.0 amiga port, and Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> modified the driver and made it machine-independent.