| LOM(4) | Device Drivers Manual (sparc64) | LOM(4) |
lom — lights out
management
lom* at ebus?
The lom driver provides support for the
LOMlite lights out management module found on Sun Netra t1 systems and the
LOMlite2 module found on Sun Fire V100/V120 and Sun Netra X1 systems.
Temperature readings, PSU status and fan status provided by the LOM are made
available through the sysctl(8)
interface. The integrated
watchdog(4) timer can be
configured through the sysctl(8)
interface as well. The watchdog timer supports timeouts between 1 and 126
seconds. If the watchdog is disabled, which is its default state, it will
turn on the system's fault LED after the maximum timeout of 126 seconds.
The lom driver will update the hostname
stored in the LOM whenever the system's hostname is changed.
hostname(1), ebus(4), intro(4), watchdog(4), sensorsd(8), sysctl(8)
The lom driver first appeared in
OpenBSD 4.7.
The lom driver was written by
Mark Kettenis
<kettenis@openbsd.org>.
| July 16, 2013 | openbsd |