NAME

fintek — Fintek F75375 temperature sensor

SYNOPSIS

fintek* at iic? flags 0x0000

DESCRIPTION

The fintek driver provides support for the Fintek F75375 temperature sensor and fan controller. The sensor possesses a collection of sensor values which are made available through the sysctl(8) interface:

$ sysctl hw.sensors.fintek0
hw.sensors.fintek0.temp0=31.00 degC
hw.sensors.fintek0.temp1=29.00 degC
hw.sensors.fintek0.fan0=0 RPM
hw.sensors.fintek0.fan1=0 RPM
hw.sensors.fintek0.volt0=1.72 V DC (VCC)
hw.sensors.fintek0.volt1=1.34 V DC
hw.sensors.fintek0.volt2=1.73 V DC
hw.sensors.fintek0.volt3=0.90 V DC

On some machines the fans will not function properly with the chip in default mode. Setting flags to 0x0001 will make the fans run at full speed to prevent overheating.

SEE ALSO

iic(4), intro(4), sensorsd(8), sysctl(8)

HISTORY

The fintek driver first appeared in OpenBSD 4.0.

AUTHORS

The fintek driver was written by Dale Rahn <drahn@openbsd.org>.